Cameron Mallet Putters, The Red X And Futura Phantom, And Two Limit Edition Cameron Models
RED X Mallet Putters
As is the case with many of Scotty Camerons putters, the mallet head styles of this line samsung cell phone case article are extremely sculptured searching and pleasing to the eye. There is at as soon as a particular boldness in the styles but also a simplicity as wel...
This article will talk about a number of putter product lines supplied by Scotty Cameron and Titleist. These will consist of the two lines of mallet putters, the RED X series and the Futura Phantom, as effectively as two restricted edition putters.
RED X Mallet Putters
As is the case with numerous of Scotty Camerons putters, the mallet head designs of this line are extremely sculptured searching and pleasing to the eye. There is at after a particular boldness in the styles but also a simplicity as properly. 1 wonders if Cameron doesnt do sculpture on the side. The newest putters in this series, the Red X3 and the Red X5, are just being shipped to Titleist retailers as this post is becoming written in mid-September 2007. Each of these putters are milled from 303 stainless steel, and they have a black anodized sole plate as well as a glare resistant charcoal mist finish. Cameron has used this glare resistant finish on a number of his putter designs for 2007. All the mallet putters in the product line have a single alignment line. The differences in between these two putters are that the Red X3 has a conventional shaft with a shaft offset obtained by a single bend in the shaft, and that the Red X5 has a full shaft offset and a plumbing neck. Both have the standard four degrees of loft and 71 degrees of lie angle, and they each come in lengths of 33, 34, and 35 inches. For left-handers, only the Red X3 is offered in a 35 inch length.
The older members of this item line are the Red X and the Red X2, and there are a number of variations of these. There are belly putters for each models, named the Red X Mid and the Red X2 Mid, and there is a long length putter called the Red X2 Extended. These putters had been designed in 2003, and Cameron did a lot of analysis with various components to obtain the very best feel and sound feasible at impact. The heads are created of stainless steel, and there is an further face insert created of a distinct variety of stainless steel, and the insert is offered an elastomer border which aids give very good feel and sound at influence. The difference in between the Red X and the Red X2 is in the shaft configuration. The Red X has a single bend a single shaft offset and the shaft connects to the putter head about half way between the center of the mallet head and the heel. There is no shaft offset on the Red X2, and the shaft connects to the mallet just behind the middle of the putter head. All the putters in the Red X line retail for $300.
Future Phantom Mallet Putters
There are two putters in this product line, the Mallet and the Mallet 2. The distinction amongst the two is that the shaft connects to the mallet head at virtually the center for the Mallet two, whereas for the Mallet putter the shaft connects closer to the heel. There is no shaft offset for either putter. As the item line name implies, these putters have a really futuristic and stylish look to them. Behind the flat putter face is a stainless steel back plate that has a five-line alignment configuration. Behind that is a semicircular bar which gives the putter its mallet shape. It is apparent from basically looking at these putters that the weight has been redistributed to obtain a high moment of inertia, or MOI, which offers forgiveness on off-center hits. The putters come with the regular loft of click for cross drilled rotors four degrees and common lie angle of 71 degrees, have no shaft offset, and are offered in lengths of 34 and 35 inches. The Mallet 2 is only available in proper-handed models. The materials utilised to produce the mallet heads are 661 aircraft aluminum with a stainless steel back weight, as talked about above. Both putters retail for $300.
Restricted Edition Catalina Classic
This is a classic putter design with only about 2000 pieces created. The head of the putter is made of carbon steel and is coated with the charcoal mist anti-glare finish which also increases the putters durability. There is a single aiming line on the back center flange, and the grip is a soft stitched leather.
Teryllium Ten Limited Edition
Teryllium is a copper metal created from 12 different alloys, and it supplies a soft feel and great sound due to the thick copper insert. Cameron released the very first teryllium putters ten years ago and is following up with an updated version. The sleek black look combined with the copper metal color, as effectively as the putters shape, make it a actually beautiful instrument. Soft hand stitched leather grips are standard.
The two mallet putter product lines offered by Cameron and Titleist, the RED X series and the Future Phantom mallet putters, supply an exceptional range of options for golfers who are sold on mallets. I have utilized a mallet for years because it let me hit solid putts on a constant basis. For the golfer who has everything, the two limited edition lines give exclusive putter audi a4 tail lights choices as well.
